Washer repair in Connecticut

Most appliance repairs in CT run $120 to $400 depending on the part and how long the job takes. Premium brands like Sub-Zero, Wolf, Thermador, and Miele often run higher because their parts cost more. You get a written estimate before we start any work. The diagnostic fee is waived when you go ahead with the repair.

Often yes. If you call before noon, we can usually get a tech to you the same afternoon. We run morning, afternoon, and evening slots Monday through Saturday, and emergency calls 24/7.

On Whirlpool, Maytag, and Kenmore direct-drives, the usual cause is a worn motor coupler. On most front-loaders it's the drive belt or a stuck door lock circuit. On LG and Samsung direct-drives, it's almost always the rotor position sensor or a hall sensor. We test the lock circuit and the motor before swapping anything.

Where the water shows up tells us a lot. Water at the front of the machine is almost always a torn boot seal on a front-loader. Water underneath usually means a cracked drain hose, a worn pump seal, or a tub bearing seal that has let go. We can run the washer empty to confirm where the leak starts before opening it up.

Yes. This is a top-five call for us in Connecticut. Most CT basements have uneven concrete floors, and front-loader shock absorbers wear faster than they should because the drum is constantly fighting that tilt. New shocks bring the noise and movement back to normal. While we are there, we will level the feet so the new shocks last longer.